ET-5RS-4ST-E1 - Sixnet ET-5RS-4ST-E1 Real-Time-Ring Industrial Ethernet Switch with 3 RJ45 Ports...
- Part Number:
- ET-5RS-4ST-E1
- Model Number:
- ET-5RS-4ST-E1
- Make:
- SIXNET
- Lead Time:
- Available
- Qty In Stock:
- Available
Sixnet ET-5RS-4ST-E1 Real-Time-Ring Industrial Ethernet Switch with 3 RJ45 Ports 2 multimode ST 4 km Fiber Ports Simple Type: Ethernet Switch
The ET-5RS is a 5 port industrial Ethernet switch featuring Sixnet’s Real-Time-Ring™ which provides very fast, fault-tolerant network redundancy and prioritized message delivery needed in critical real-time systems. These Rings self-configure and just run, without the complex configuration steps required by alternative solutions. This advanced technology delivers reliability and performance, saves you money, and makes your job easier.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 5 ports with up to two fiber optic ports
- Dual power with MIL-STD-1275 protection
- Pre-configured for true plug and play simplicity
- Super-fast, fault tolerant ring redundancy
- Truly rugged design with -40 to 85°C operation
Specifications
- Environmental: Humidity (non-condensing) 5 to 95% RH
- Environmental: Operating temperature range -40 to +85 °C
- Environmental: Storage temperature range -40 to +85 °C
- Environmental: Vibration IEC60068-2-6
- Ethernet Compliance: IEEE 802.1p (QoS / CoS – Quality & Class of Service)
- Ethernet Compliance: IEEE 802.3 (10Mbps Ethernet supports legacy devices)
- Ethernet Compliance: IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
- Ethernet Compliance: IEEE 802.3x (Full-Duplex with Flow Control)
- Ethernet Performance: 5 Ethernet ports total
- Ethernet Performance: Ethernet isolation 1500 VRMS 1 minute
- Ethernet Performance: Ethernet protocols supported all IEEE 802.3
- Ethernet Performance: Fiber maximum distance (full duplex) 4 km (mm), 20 km (sm), 40 km (long haul) or more
- Ethernet Performance: Fiber multimode 50- 62.5/125 um (SC or ST)
- Ethernet Performance: Fiber optic port speed 100BaseFX (100 Mbps)
- Ethernet Performance: Fiber optic port wavelength 1300 nm center typ.
- Ethernet Performance: Fiber singlemode 8-10 9/125 um (SC or ST)
- Ethernet Performance: Full or half duplex operation configurable
- Ethernet Performance: Intelligent store & forward Ethernet switch
- Ethernet Performance: MAC addresses supported 2048
- Ethernet Performance: Memory bandwidth 3.2 Gbps
- Ethernet Performance: RJ45 MDI/MDIX auto-crossover
- Ethernet Performance: RJ45 ports (shielded) 10/100BaseTX
- Ethernet Performance: RJ45 speed (10 or 100 Mbps) auto-negotiation
- Ethernet Performance: RJ45 TD and RD auto-polarity
- Ethernet Performance: Typical latency for 10 Mbps ports 16 us + frame time; Typical latency for 100 Mbps ports 5 us + frame time; varies on load and settings
- Physical: Case (UL 94V-0 Lexan & rust-free aluminum case) IP30 protection
- Physical: DIN rail or direct panel mounting
- Power Input: 4.0 W (model -1 without fi ber)
- Power Input: 5.0 W (model -2 & -3 with 1 fi ber)
- Power Input: 6.0 W (models -4 & -5 with 2 fi ber)
- Power Input: Input power (typical - all ports active at 100 Mbps)
- Power Input: MIL-STD-1275 power protection standard
- Power Input: Military surge protection 100 volts for 1 second
- Power Input: Power Input 10-50 VDC (Derate 1.8°C / V above 30V)
- Power Input: Spike potection 5,000 watts (10x for 10 uS) or 250 volts (50x for 100 uS)
- Power Input: Transient protection 15,000 watts peak
- Real Time Ring Features: Dual ring support
- Real Time Ring Features: Link loss recovery time: 30mS + 5mS/hop
- Real Time Ring Features: Maximum switches in ring: 50+
- Standards Compliance: Electrical safety - UL508/CSA C22.2/4: EN61010-1, CE
- Standards Compliance: EMC immunity - EN61000-6-2, CE
- Standards Compliance: EMI emissions - FCC part 15, ICES-003; EN61000-6-4, CE
- Standards Compliance: Eye safety ( fiber models) IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
- Standards Compliance: Hazardous locations: UL1604/CSA C22.2/213 (Class I, Div. 2); EN60079-15 (Zone 2, Category 3), CE (ATEX)
- Status Reporting: “OK” contact output up to 0.5 Amp
- Status Reporting: Modbus Ethernet over UDP
Applications
- Distributed systems
- Outdoor / marine use
- Real-time control
Aliases
- None Available
Related Items
ET-GT-ST-2
A feature-rich process / IO controller that is 100% IPm- ET-GT-ST-3
This advanced gateway with redundant Ethernet ports ensures fault-tolerant I/O - ET-GT-ST-1
This I/O concentrator allows you to interface SIXNET I/O (SixTRAK - ET-5RS-1-E1
Sixnet ET-5RS-E1 Real-Time-Ring Industrial Ethernet Switch with 5 RJ45 Ports